Mitsubishi MR-J3-500A AC Servo Motor Drive Amplifier MRJ3500A

Description

Mitsubishi MR-J3-500A Servo Motor Drive MRJ3500A 5KW 200V

• Extended Product Type: Motors
• Product ID: MR-J3-500A
• Mitsubishi Type Designation: Motors

Description of Mitsubishi MR-J3-500A Servo Motor Drive Amplifier

Mitsubishi MR-J3-500A #discontinued – AC motion servo drive / amplifier with built-in dynamic brake + built-in regenerative resistor – Mitsubishi Electric (MELSERVO J3 – MR-J3 series) – Rated output 5000W / 5kW – Rated current 28A – Supply voltage 200Vac-230Vac (200V class; 220Vac / 230Vac) (3-phase input (3P)) – with RS-422 communication capability – rated for 0…+55°C ambient – equivalent to MRJ3500A

Specifications of Mitsubishi MR-J3-500A Servo Motor Drive Amplifier

• Primary brand: Mitsubishi Electric
• Main function: AC servo drive
• Product series / family name: MELSERVO J4 series
• Sub-range name: MR-J4 series
• Functions: AC motion servo drive / amplifier, sine wave PWM control/current control method, 2-channel analog monitor, Safe torque off (STO), fully closed loop control, load-side encoder interface, advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, tightening & press-fit function, machine diagnosis function, power monitoring function, controller-peripheral operation function, scale measurement function, J3 compatibility mode, super trace control, lost motion compensation
• Design: safety unit compatibility, 2-wire or 4-wire type communication method, forced ventilation cooling
• Supply voltage (AC): 200Vac-240Vac (200V class; 220Vac / 230Vac)
• Supply voltage (DC): 283Vdc-340Vdc
• Type of network: Single-phase input (2P) or 3-phase input (3P) or DC input
• Rated current: 28A
• Rated active power (kW): 5000W / 5kW
• Protection functions: overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder fault protection, regenerative fault protection, under voltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection protection, linear servo control fault protection
• Communication protocol: SSCNET III/H
• Digital inputs: 1 x digital input (24Vdc; sink/source) (EM2)
  • 1 x digital input (24Vdc; sink/source) (LSP)
  • 1 x digital input (24Vdc; sink/source) (LSN)
  • 1 x digital input (24Vdc; sink/source) (SON)
  • 1 x digital input (24Vdc; sink/source) (RES)
  • 1 x digital input (24Vdc; sink/source) (PC / ST1 / RS2)
  • 1 x digital input (24Vdc; sink/source) (TL / ST2 / RS1)
  • 1 x digital input (24Vdc; sink/source) (SP1)
  • 1 x digital input (24Vdc; sink/source) (SP2)
• Digital outputs1 x digital output (rly. contact type) (ALM)
  • 1 x digital output (rly. contact type) (ZSP)
  • 1 x digital output (rly. contact type) (TLC / VLC)
  • 1 x digital output (rly. contact type) (INP / SA)
  • 1 x digital output (rly. contact type) (RD)
• Analog inputs1 x analog input (0-10Vdc) (TLA / TC)
  • 1 x analog input (-10…+10Vdc) (VC / VLA)
• Analog outputs1 x analog output (-10…+10Vdc) (MO1)
  • 1 x analog output (-10…+10Vdc) (MO2)
• Degree of protection: IP20
• Ambient air temperature for operation: 0…+55 °C
• Ambient air temperature for storage: -20°C…+65 °C
• Current consumption: 21.7A input
• Power consumption: (drive auxiliary power consumption) 45 W
• Technical compatibility with: HF-SP series
  • HF-JP series
  • HA-LP series
  • HC-LP series
  • HC-RP series
  • HC-UP series
• Order code / Manufacturer SKU: MR-J3-500A
• Manufacturer product status: Commercialized
• Equivalent to: MRJ3500A
• Manufacturer description: AMP 5KW 200V SSCNET
• Compliant with standard(s)CE marking: TUV Rheinland, cULus, UL, KC, EN61800-5-2, EN61800-5-1, EN61800-3, EN ISO 13849-1 PLe Cat3, EN62061, SILCL3, IEC61508-5-2, EN50581, UL508C, CSA, KC, EAC
• Benefits: high-speed serial communication